TRZ 326-6 (G-body / S10) 2″ Drop Billet Spindle TBM 2 Piston DR1 Lightweight Drag Race Brake Kit 001-0210

*Note: These only work with the P/N 326-6 TRZ Spindle for Gbody / S10.Does not work with factory style Gbody / S10 spindles/hubs.

Installation Instructions
Additional Installation Info

Kit includes:

• F1 2 piston calipers002-0054SSP-1/002-0054SSP-2
• #1 Standard F1 Pads 6-1019
• 10.75x .310 steel revolution rotors3-10753105525D
• Steel caliper mounting brackets16-0210-1/16-0210-2
• Aluminum 5 on 4.75 hubs 8-103D
• Timken bearing, races and seals
• 1/2 -20 wheel studs
• Mounting hardware kit

For Wheel Speed Sensor Kit:Click Here

This Kit also fits the following:

• Strange Aluminum struts
• TRZ 325-2/325-4/325-6
• Racecraft 300108 / 300114 / 300115 / 300116
• Double AA Performance Spindles

Kit weight: 18.4 lbs

*Please use red Loctite on all rotor bolts*

Wheel Speed Sensor Kit

TBM 2 Piston (F1/DR-1) Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit. We do not recommend 2 piston front brakes for drag vehicles thatare over 3400 lbs

We recommend usingTBM DOT 5.1 Extreme 6 Brake Fluidfor all TBM Brake Kits. You’ll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.
WARNING: Cancer and Reproductive Harmwww.P65Warnings.ca.gov

For all TRZ Kit Options/References See This Chart